En
Fr
High Power and Density
Both the Matrix 2500B and Matrix 2500C adopt an easy-to-handle form factor and measure just 40×40×23.5cm (15.75×15.75×9.25in). Combined with an efficient optical design, they deliver excellent light quality and high illuminance—Matrix 2500B outputs 103,000lux and the Matrix 2500C outputs 67,900lux (at 3 , 5,600K, with FL-MT25 Motorized Fresnel Lens at 16°), making them ideal for bounce lighting, accent lighting, and even background illumination.
Nebula Light Engine
The Matrix 2500B is equipped with the advanced Nanlux Nebula B4 Light Engine, offering a color temperature range of 2,700K–6,500K with ±80 green/magenta shift control. The Matrix 2500C is a full-color fixture equipped with the Nebula C8 Color Light Engine, offering an ultra-wide color temperature range of 1,000K–20,000K with ±200green/magenta adjustment across the full range.
The Matrix 2500B has CCT and Effect modes, while Matrix 2500C has CCT, HSI, HSIW, RGBW, XY Coordinates, Gel, and Effect modes. Both fixtures provide excellent color rendering with average CRI and TLCI of 98. With 0.1% dimming control, they deliver fully linear dimming performance, ensuring smooth and precise transitions from0.0% to full output.
Build Multi-Light Arrays with Matrix
With an all-in-one design integrating the control unit and power adapter, only a power cable is needed to make the fixture ready to use. With the optional Nanlux dedicated four-light frame, users can put four Matrix fixtures together to easily rig a 10,000W lighting array. The included 4-way power distribution cable powers all four fixtures within the array simultaneously, while the EXT port cable enables synchronized control via a single control signal, simplifying cabling and setup.
When configured as an array, the spacing between lamps in adjoining fixtures closely matches the internal spacing of the lamps within each fixture, creating a compact layout and producing an even beam. Their high output and dense fixture arrangement deliver exceptional punch. Multiple arrays can be mounted on truss systems and combined into a larger modular lighting matrix.
Built with a one-piece magnesium alloy housing and are rated IP66, the fixture combines strength with lightweight design, performing reliably in harsh environments for extended outdoor use.
Efficient Cooling Solution
The fixture uses an innovative front-to-rear airflow system designed to address heat accumulation issues commonly found in other high-density array setups. They ensure stable performance under continuous high-load operation by effectively reducing heat build-up due to stacking. The cooling system offers four fan modes, which users can switch between depending on the required output and noise control requirements. In Smart mode, fan speed automatically adapts to ambient temperature, reducing interference with audio recording.
Flexible Wired and Wireless Controls
The control interface of the Matrix 2500B and Matrix 2500C comprises of a panel with intuitive operation via three knobs and four buttons. Both fixtures also support remote controller, wired controller, NanLink App2.0, DMX/RDM, LumenRadio CRMX and Art-Net/sACN control. The NFC function enables batch configuration of DMX parameters across multiple fixtures, speeding up pairing efficiency.
With a DMX control system, each lamp head can be individually controlled for precise adjustment across different areas of large lighting arrays. In virtual production, the lighting responds in real time to on-screen changes, enabling dynamic control of the ambient light.
Advanced Accessories
The included FL-MT25 Motorized Fresnel Lens solves tricky manual adjustment issues when lighting arrays are rigged at height. It offers a 16°–48° zoom range, with beam angles remotely adjusted simultaneously across all four lenses. This Fresnel lens is also IP66-rated for use in challenging environments. The optional Dual-Head Yoke and Four-Light Frame enable easy two- and four-fixture configurations.
Both Matrix 2500B and Matrix 2500C will ship in Q3, 2026.
